Urine Alcohol Dip Card
Urine Alcohol Dip Card
Detects the presence of alcohol in urine. The dip card design makes testing easy and very convenient.
Up to 99% Accurate & Adheres to SAMSHA Cutoffs
Immediate Results
Shelf-life up to 24 months
Minimum quantity: 25 units
Urine Alcohol Dip tests are defined as simple laboratory procedures that are cleared by the FDA for home use and that incorporate methodologies that are so easy and accurate that it is unlikely that mistakes would occur. Another requirement is that they would pose no reasonable risk of harm to a patient if they were performed incorrectly.
Usage Instructions |
1. Bring the test to room temperature before opening. Remove the test panel (drug test strip) from the sealed pouch and use as soon as possible. |
2. Take off the cap from the test end. Ensure arrows are pointing towards the urine specimen, immerse or "dip" the drug test panel vertically into the specimen for at least 10-15 seconds. Do not pass the arrows on the test panel while immersing. |
3. Place the test panel on a non-absorbent flat surface, start the timer, and wait for colored lines to appear. Read results within 5 minutes. Do not interpret results after 5 minutes. |
4. Results are interpreted as "Negative", "Positive", or "Invalid" (insufficient specimen volume or incorrect technique used). |
Our dip cards virtually eliminate all contact with urine and are the most accurate tests available. An accurate alternative to laboratory testing with results in 5 minutes, not 24-48 hours as required by laboratories. Our multi panels provide the same level of accuracy as the initial screens used in laboratories. These devices are on average 75% less expensive than traditional lab testing.