Dräger Alcotest 6810 DOT Complete kit with CalGAZ 105L Gas Canister

The Dräger Alcotest 6810 DOT is the product of experience in the Department of Transportation alcohol testing arena. The DOT firmware has been specifically designed for Workplace Testing as specified by the 49 CFR Part 40.

This instrument is listed on the National Highway Traffic Safety Administration Conforming Products List (NHTSA CPL) as an Evidential Breath Tester.

This kit is completed with a 105L dry gas canister to perform the required accuracy tests and annual calibrations.

The Draeger 6810 DOT is a Breathalyzer used widely by the US companies to perform DOT Workplace testing and conform with 49 CFR Part 40. It is able to measure Breath Alcohol Content (BAC) at an accuracy of ± 0.005%BAC at 0.100%BAC.

The calibration is done with a 12L gas regulator to ensure that sufficient pressure is present for calibration.

Features:

• Fully Compliant with DOT Workplace Testing guidelines as described in 49 CFR Part 40
• Specially Configured Firmware for DOT Testing
• Draeger 1/4" Electrochemical Fuel Cell Sensor reacts specifically to alcohol, and features very short response times. Even with a very high alcohol content, the device responds quickly with the results.
• ± 0.005%BAC at 0.100%BAC When a person's actual breath alcohol concentration is 0.100%, the Draeger 6810 will always produce a result between 0.105% to 0.095%.
• Short recovery time of 3 seconds after a blank test and 10 seconds after a positive test
• Large Built-in Memory Approx 2,000 sets of memory to record test data
• Designed for Ergonomics Easily operated by left-handed and right-handed persons.
• Hygienic Mouthpiece ensures that the operator does not come in contact with the subject's saliva after each test.
• Low Energy Consumption A fresh pair of AA batteries last over 1,500 tests
• Available in 4 Languages English, German, French and Spanish
• Wide operating temperature With an operating temperature of 5-50°C, it exceeds the typical range of 0-30°C.
• 4 Sampling Modes