Skip to product information
1 of 2

Mission

Mission® UTI Urinary Tract Infection Test Strip (3T)

Mission® UTI Urinary Tract Infection Test Strip (3T)

Regular price $0.00 SGD
Regular price Sale price $0.00 SGD
Sale Sold out

The UTI Urinary Tract Infection Test Strips are for the detection of Leukocytes (LEU) and Nitrate (NIT) in human urine. It is used as an aid in the screening of urinary tract infection (UTI). 

What are the Common Symptoms of UTI?

Common symptoms of UTI include a burning sensation of pain during urination, fever, or back pain.

Instructions

Allow the strip and urine specimen to reach room temperature prior to testing. Gently wash the genital area. Remove the strip from the closed canister or the sealed pouch, and use it as soon as possible. Close the canister tightly after removing the required number of strip(s). 

  1. Remove the strip from the closed canister or the sealed pouch, and use it as soon as possible. Close the canister tightly after removing the required number of strip(s).
  2. Hold the end of the strip farthest away from the test pad(s) and begin urinating. After 1 or 2 seconds of passing urine, hold the strip downward with the test pads pointing into the urine stream for 1-2 seconds. Make sure the test pads are completely wet. See illustration 1. Note: If you prefer, you can urinate in a clean and dry container. Dip the test pad(s) of the strip completely into the urine and remove it immediately. Run the edge of the strip against the rim of the urine container to remove excess urine.
  3. After removing the strip from your urine, immediately bring the edge of the strip into contact with an absorbent material (e.g. paper towel) to remove excess urine. Lay the strip with the test pad(s) facing upwards and begin timing. See illustration 2.
  4. Read the result at 1 minute for Nitrite and at 2 minutes for Leukocyte. Compare the test pad(s) to the colour blocks on the colour chart. Hold the strip close to the colour blocks, and carefully match each pad to the colour chart for that test. See illustration 3. Note: Do not read results after 3 minutes.

Refer to Package Insert for more information.  

Material provided:

  • Strips
  • Colour Chart
  • Package Insert 
View full details